IPV4S by Pioneer4you Greenleaf 120W Box Mod

IPV 4S by Pioneer4you Greenleaf 120W Box Mod

Pioneer4You has established a well-deserved reputation by continuously introducing extremely technologically advanced electronic cigarette devices. Their IPV line of Box MODs has been among the most popular devices since their release—and for good reason, they’re spectacular. Their recent release, the IPV 4S, is the upgraded version of the IPV4 and constructed with the same high-quality materials we have come to expect, but is also fitted with a host of advanced features you're sure to love.

The Pioneer4You IPV 4S is beautifully constructed with high-grade aluminum, making it both lightweight and durable. The shell is wrapped with a rubber textured grip, which is not only comfortable to hold, but also protects the user from a potentially hot device. The outer grip is also useful, as it makes the device virtually slip-free. The IPV 4’s ergonomic design is extremely pleasant to hold, fitting perfectly in your hand.

The IPV 4S’ battery door is now equipped with a series of magnets rather than screws, making removal of the batteries effortless. The device is also furnished with a spring-loaded 510 connector, virtually ensuring a secure connection between the IPV 4 and the atomizer, glassomizer, or clearomizer used with it.

The Pioneer4You IPV 4S Box MOD is equipped with the revolutionary Yihi SX330-V4SL Chip. The remarkable processor is currently among the most advanced in the vaping industry. The IPV4S now supports dual mode Ni200 Nickel and Ti Titanium atomizers in joule mode. It is capable of producing a maximum wattage output of a whopping 120W. With this much power, the IPV 4 is can accommodate atomizer resistances from 0.10 Ohms to 3.0 Ohms. This makes this device perfect for advanced sub-ohm vapers to novice vapers alike.

Furthermore, Yihi SX330-V4SL Chip features a temperature control system, allowing you to customize the temperature of the atomizer coil while in Joule Mode. The device can also be switched to Power Mode, thereby acting as a standard device that can be used with a variety of Kanthal resistance coils.

The IPV 4S Box MOD by Pioneer4You is designed with a very clear OLED screen that displays a variety of important and relevant information. The screen demonstrates the voltage and wattage that the device is currently set to. It also identifies the ohms resistance of the atomizer being used, along with a puff counter and battery level indicator.

The revolutionary IPV 4S MOD is a variable voltage and variable wattage device. The output wattage can be adjusted from between 5W to a staggering 120W, while the voltage can be adjusted from between 1V to 7.5V. With this wide of a range of available output power, you can use your IPV 4 with a very wide range of atomizer resistances from 0.1 Ohms to 3.0 Ohms. This makes it perfect for both sub-ohm vaping as well as standard resistance vaping.

Additionally, the Pioneer4You IPV4S Box MOD is brilliantly designed with passthrough capability. This wonderful feature allows you to use your device while it is being charged. As long as you are near and outlet or any device capable of providing power through a USB port, such as a computer, you will never be left without a functioning device. Purchase a USB car adapter, and you will be able to vape while you charge in your car, which is perfect for long drives and road trips.

The Pioneer4You IPV 4S is not only a technologically advanced and aesthetically beautiful device, but it is also furnished with an array of important safety features. It is armed with Reverse Polarity Protection, Low Resistance Protection, Battery Low Voltage Protection, Temperature Overheat Protection, Short Circuit Protection, and On/Off Capability. With these essential safety capabilities, you can vape with peace of mind knowing that your IPV4S has all of the necessary safety features.

If you’re looking for a feature rich and technologically advanced box MOD, the Pioneer4You IPV for is definitely at the top of the list!

Note: Batteries Sold Separately.

Purchase Batteries for The IPV4S Box MOD

Pioneer4You IPV 4S Specifications:

Casing Material: Aluminum Alloy

Threading: 510

Battery Compatibility: Takes Two 18650 Batteries (35A or Higher) - (Sold Separately)

Output Wattage: 5W – 120W

Output Voltage: 1V – 7.5V

Output Temperature: 5J – 50J (Ni-200)  5 - 100J (Ti)

Temperature Limit: 200 Degrees – 580 Degrees Fahrenheit

Joules Mode Resistance Compatibility: 0.12 Ohms – 1.0 Ohms

Power Mode Resistance Compatibility: 0.1 Ohms – 3.0 Ohms

Output Current: 35A

Input Current: 1.3A – 25A

Product Weight: 0.27 Pounds (4.4 Ounces)

Height: 4.24 Inches (107.7 mm)

Length: 2.75 Inches (69.9 mm)

Width: 1.02 Inches (25.9 mm)

Pioneer4You IPV 4 Kit Includes:

1 x IPV 4S Box MOD

1 x User Manual

1 x Warranty Card

1 x Gift Box